Flooring systems in food processing facilities have to withstand severe exposure which includes mechanical, chemical and thermal stresses.

The biggest challenges for flooring systems in food processing facilities are generally in the production areas. They have to withstand severe exposure which includes mechanical, chemical and thermal stresses. The right degree of slip resistance is also required to meet the Health & Safety regulations.

NZ Specialised Coatings apply a range of Cement, Epoxy and Polyurethane resins for the specific environments.

Most production areas can be divided into ‘dry’ or ‘wet’ processing areas.
Example of ‘wet’ processing area is in the vegetable industry. Confectionary would be an example of a ‘dry’ processing area where they produce sweets etc.

Clean Room Suitable Materials

PRODUCTS

Sikafloor 20N PurCem

Is a four part, resin rich, water dispersed, high strength, trowel grade, coloured polyurethane modified, cement and aggregate screed suitable for floors subject to heavy loading, abrasion and chemical exposure?

USES:
Food processing plants, wet or dry areas, freezers and coolers, thermal shock areas. Chemical plants, laboratories, workshops.

CHARACTERISTICS:
Excellent chemical resistance, slip resistance, non-taint odourless, high abrasion resistance resulting from its silica aggregate structure. 6-9mm thick when laid. Fast curing and easily maintained.

Sikafloor 20N PurCem
SPECIFICATIONS:

  • High wear resistance
  • High chemical resistance
  • High thermal shock resistance
  • Slip resistant
  • Odour-free
  • Hygienic
  • Coloured
  • Easy to clean (including steam cleaning)

SIKA SYSTEM / PERFORMANCE:
Primer: Generally not required. If necessary, use ­Sikafloor-156/-161 broadcast with quartz sand.
Screed: Sikafloor-20 PurCem, three / four part, easy trowel, polyurethane ­modified, cement based floor screed.
Total layer thickness: 6–9mm

Sikafloor 21 PurCem

Is a three part, water dispersed medium to high strength coloured polyurethane modified, cement and aggregate screed with self-smoothing properties.

USES:
Food processing plants, in wet and dry process areas, freezers and coolers, thermal shock areas. Chemical plants, Laboratories and Workshops.

CHARACTERISTICS:
Excellent chemical resistance. Non taint, low odour. High abrasion resistance resulting from its silica aggregate structure. Joint less and easily maintained.

Sikafloor 21 PurCem
NON-SLIP SPECIFICATIONS:

  • High wear resistance
  • High chemical resistance
  • Enhanced slip resistance
  • High thermal shock resistance
  • Hygienic
  • Coloured
  • Slip resistant
  • Odour-free

SIKA SYSTEM / PERFORMANCE:
Primer: Generally not required
Base layer: Sikafloor-21 PurCem, three / four part, polyurethane modified, cement based screed.
Broadcast: Coloured or natural quartz sand (for enhanced slip resistance).
Seal coat: 1 – 2 x Sikafloor-31 PurCem, three part, water dispersed, polyurethane sealer coat.
Total layer thickness: 4.5–6mm


Sikafloor 21 PurCem - Smooth
SMOOTH SPECIFICATIONS:

  • High wear resistance
  • High chemical resistance
  • High thermal shock resistance
  • Odour-free
  • Hygienic
  • Easy to clean
  • Coloured

SIKA SYSTEM / PERFORMANCE:
Primer: Scratch coat Sikafloor-21 PurCem
Screed: Sikafloor-21 ­PurCem, hree / four part, self-smoothing, polyurethane ­modified, cement based screed.
Total layer thickness: 4.5–6mm

Sikafloor 21 PurCem - 4.5-6mm Smooth

CHARACTERISTICS:
Medium to heavy duty, smooth screed.

Sikafloor 21 PurCem - 4.5-6mm Smooth
SPECIFICATIONS:

  • High wear resistance
  • High chemical resistance
  • High thermal shock resistance
  • Odour-free
  • Hygienic
  • Easy to clean
  • Coloured

SIKA SYSTEM / PERFORMANCE:
Primer: Scratch coat Sikafloor-21 PUrCem
Screed: Sikafloor-21 ­PurCem, three / four part, self-smoothing, polyurethane ­modified, cement based screed.
Total layer thickness: 4.5–6mm

Sikafloor 31N PurCem

Is a three part, solvent free, high build, coloured, matt finish, polyurethane modified, cement and aggregate coating with excellent chemical resistance and very good resistance to abrasion and mechanical damage.

USES:
Food processing plants in wet and dry process areas, freezers and coolers. Pharmaceutical plants, containment areas and Chemical process areas.

CHARACTERISTICS:
Excellent chemical resistance. Non taint, odourless, excellent long term wear resistance from a two coat application.

Sikafloor 91

A three component solvent free, epoxy resin based patching mortar and screed for industrial floors subject to heavy traffic. A trowel finished screed applied in layers between 5-40mm thick.

USES:
Dairy manufacturing and processing plants, pulp and paper industry, Garages and engineering workshops, Warehouses, loading bays, ramps. Food preparation areas and Chemical processing areas.

CHARACTERISTICS:
Solvent free, non-tainting. Excellent resistance to abrasion, range of colours, impermeable to liquids, Good chemical resistance, high impact resistance and excellent adhesion.

Sikafloor 91
SPECIFICATIONS:

  • High wear resistance
  • High chemical resistance
  • Medium thermal shock resistance
  • Slip resistant
  • Odour-free
  • Hygienic
  • Easy to clean
  • Coloured

SIKA SYSTEM / PERFORMANCE:
Primer: Sikafloor-156/-161
Screed: Sikafloor-91 or -156, epoxy screed
Total layer thickness: 5–6mm

Sikafloor 264 Broadcast - Rigid Screed 1-3mm

CHARACTERISTICS:
Broadcast, coloured, rigid screed 1-3 mm

Sikafloor 264 Broadcast - Rigid Screed 1-3mm
SPECIFICATIONS:

  • High abrasion resistance
  • Waterproof
  • Slip resistance
  • Aesthetics
  • German standard (OS-8)

SIKA SYSTEM / PERFORMANCE:
Primer: Sikafloor-156/-161 (optional)
Base coat: Sikafloor-264, a solvent free, coloured epoxy binder, broadcast with Quartz sand.
Seal coat: Sikafloor-264
Total layer thickness: 1-3mm

Sikafloor 264 Broadcast - Rigid Screed 2-4mm

CHARACTERISTICS:
Broadcast, coloured, rigid screed 2-4mm

Sikafloor 264 Broadcast - Rigid Screed 2-4mm
SPECIFICATIONS:

  • High wear resistance
  • Good chemical resistance
  • Medium thermal shock resistance
  • Slip resistance
  • Coloured

SIKA SYSTEM / PERFORMANCE:
Sika System / Performance
Primer: Sikafloor-156
Base coat: Sikafloor-264 NS, a two part, total solid, coloured, epoxy binder for textured broadcast systems.
Broadcast with Quartz sand.
Seal coat: Sikafloor-264
Total layer thickness: 2-4mm

Sikafloor 264 Roll On

A 2-Part, economic, solvent-free coloured epoxy resin.

USES:
Roller coat for concrete and cement screeds with normal up to medium heavy wear e.g. storage an assemble halls, maintenance workshops, garages, loading ramps. Seal coat for broadcast systems, such as multi-story and undercover care parks, maintenance hangers and for wet process areas e.g. beverage and food industry, warehouse, vehicle showroom, dry areas, hangers and laboratories.

CHARACTERISTICS:
Good chemical and mechanical resistance, economical, solvent free, gloss finish and slip resistant surface possible.

sikafloor-264-roll-onSPECIFICATIONS:

  • High wear and abrasion resistance
  • Good impact resistance
  • Good chemical resistance
  • Medium thermal resistance
  • Easy cleaning
  • Coloured

SIKA SYSTEM / PERFORMANCE:
Primer: Sikafloor-156/ -161
Coating: Sikafloor-264, a two part, total solid, coloured, epoxy binder.
Total layer thickness: 600 – 800 microns

Sikafloor 264 Self Leveling

Is a thisotropice 2-component solvent free pigmented 100% solids high build epoxy coating for heavy duty and decorative finishes for walls and coves in addition to providing a textured floor coating.

USES:
Food processing industry, plastics industry, laboratories, aircraft hangers and workshops, washrooms, cloakrooms, chemical/pharmaceutical industries.

CHARACTERISTICS:
High mechanical properties, good abrasion resistance, high durability, coloured, joint less, easily cleaned and maintained, waterproof.

...
SPECIFICATIONS:

  • High wear and abrasion resistance
  • Good impact resistance
  • Good chemical resistance
  • Medium thermal resistance
  • Easy cleaning
  • Coloured

SIKA SYSTEM / PERFORMANCE:
Primer: Sikafloor-156/-161
Coating: Sikafloor-264 SL, a two part, coloured epoxy binder for self-smoothing screed systems.
Total layer thickness: 1-3mm

Sikafloor 264T

Is a thixotropic 2-component solvent free pigmented 100% solids high build epoxy coating for heavy duty and decorative finishes for walls and coves in addition to providing a textured floor coating.

USES:
Food processing industry, plastics industry, laboratories, aircraft hangers and workshops, washrooms, cloakrooms, chemical/pharmaceutical industries.

CHARACTERISTICS:
High mechanical properties, good abrasion resistance, high durability, coloured, joint less, easily cleaned and maintained.

Sikafloor 381

Is a two part, self-smoothing, coloured epoxy resin with high chemical and mechanical resistance.

USES:
For concrete and screed surfaces in bund areas for protection against water contamination liquids.

CHARACTERISTICS:
High chemical resistance, high mechanical resistance, liquid proof, abrasion resistant and slip resistant surface possible.

Sikafloor 381
SPECIFICATIONS:

  • High wear and abrasion resistance
  • High chemical resistance
  • Waterproof
  • Coloured

SIKA SYSTEM / PERFORMANCE:
Primer: Sikafloor-156/-161
Wearing course: Sikafloor-381, a two part, highly chemically resistant, coloured, epoxy binder for self-smoothing screeds.
Total layer thickness: ~2mm

Sikafloor 81 EpoCem & 155WN SF

CHARACTERISTICS:
Self-smoothing, temporary moisture barrier on “green” damp concrete.

Sikafloor 81 EpoCem & 155WN SF
SPECIFICATIONS:

  • For concrete floors with damaged or ­missing DPC membrane
  • No waiting time on “green” or damp concrete
  • No blistering in the finish when coating damp concrete

SIKA SYSTEM / PERFORMANCE:
Primer: Sikafloor-155 WN
Base coat: Sikafloor-81 EpoCem, three part epoxy modified, cement based, self-smoothing screeds
Topping: Sikafloor resin system to suit
Total layer thicnkess: 2-3mm

Sikafloor 81 EpoCem & 155WN

Sikafloor 81 EpoCem & 155WN
SPECIFICATIONS:

  • For surface damaged cementitious floors
  • Reduced waiting time to overcoat green concrete
  • No blisters on topping when coating damp concrete

SIKA SYSTEM / PERFORMANCE:
Primer: Sikafloor-155 WN
Screed: Sikafloor-81 EpoCem,
three component epoxy modified cementitious, self-smoothing screeds.
Topping: Sikafloor resin to suit
Total layer thickness: 2-3mm

Sikagard 62

Is a 2-pack total solid high build coating material based on epoxy resin.

USES:
For linings to storage tanks and silos, bund areas, wastewater tanks, geothermal cooling tower basins and reservoirs. Anti-corrosion coating in food processing plants, sewage works and farms and agricultural enterprises, chemical and pharmaceutical plants.

CHARACTERISTICS:
Solvent free, good chemical resistance, high build, impervious to liquids.

Sikagard 62
SPECIFICATIONS:

  • High wear and abrasion resistance
  • Good impact resistance
  • Good chemical resistance
  • Medium thermal resistance
  • Easy cleaning
  • Coloured
  • Potable/drinkable water suitable

SIKA SYSTEM / PERFORMANCE:
Wearing course: Sikagard-62, a two part, high build, protective, epoxy coating for walls and floors.
Coating: Three coats, no primer necessary
Total layer thickness: 400-600 microns

Sikagard 62 - Smooth Chemical Resistance Lining

CHARACTERISTICS:
Smooth, chemical resistant lining.

Sikagard 62 - Smooth Chemical Resistance Lining
SPECIFICATIONS:

  • High wear and abrasion resistance
  • Good impact resistance
  • Good chemical resistance
  • Medium thermal resistance
  • Easy cleaning
  • Coloured
  • Potable/drinkable water suitable

SIKA SYSTEM / PERFORMANCE:
Wearing course: Sikagard-62, a two part, high build, protective, epoxy coating for walls and floors.three coats, no primer necessary
Total layer thickness: 400-600 microns

SikaCor VEL

CHARACTERISTICS:
Smooth, flexible, highly chemically resistant, glass fabric reinforced coating.

SikaCor VEL
SPECIFICATIONS:

  • Extreme chemical protection
  • Very crack resistant
  • Heavy duty fibreglass laminate

SIKA SYSTEM / PERFORMANCE:
Primer: SikaCor VEL
Seal coat: Laminate, SikaCor VEL, heavy duty fiberglass laminate
Total layer thickness: 2-3mm

Sikafloor 24 Curehard or Purigo 5S

CHARACTERISTICS:
Clear surface harder for concrete.

Sikafloor 24 Curehard or Purigo 5S
SPECIFICATIONS:

  • Economic surface hardening
  • Good abrasion resistance
  • Prevent surface dusting
  • Curing to ASTM C-156

SIKA SYSTEM / PERFORMANCE:
1 – 2 x Sikafloor Curehard-24, a sodium silicate based liquid hardener sprayed and brushed into the substrate
OR
1 – 2 x Purigo 5S, a sodium silicate based liquid hardener sprayed and brushed into the substrate.